iPECS LIP-8012D - 2. LCD, SPEAKERPHONE & RELATED FEATURES; 2.1 Using the Display Menu

LIP-8012D & LIP-8024D User Guide
6
2. LCD, SPEAKERPHONE & RELATED FEATURES
2.1 Using the Display Menu
The Liquid Crystal Display (LCD) of the iPECS LIP-
8012D has three lines, and the LIP-8024D has four
lines of 24 characters each. The LCD is used to convey
information to you. It provides the date, time and station
number on the display while idle. It will also provide
called/calling name/number display, feature status and
an interactive menu to guide you through feature access
and User Program selections:
2. LCD, Speakerphone
& Related Features
In iPECS-LIK
To activate the Display Menu:
 Press MENU button,
 Press the Navigation up/down buttons and press the
OK Soft button to select,
OR
 Dial the associated digit (Menu selections shown):
1. PHONE SETTING
2. CONFERENCE ROOM PGM
3. ICM SMS
BACK OK
4. NETWORK CONFIG
0. ATTENDANT
BACK OK
In iPECS-MG
To activate the Display Menu:
 Press MENU button,
 Press the Navigation up/down buttons and press the
OK Soft button to select,
OR
 Dial the associated digit (Menu selections shown):
1. PHONE SETTING
2. NETWORK CONFIG
BACK OK EXIT