iPECS LIP-8012D - 5.2 Call Hold: Placing a call in a waiting state

LIP-8012D & LIP-8024D User Guide
45
6. SEND & RETRIEVE MESSAGES
6.1 Responding to a Station Message
Waiting Indication
Another station can leave a Station Message Waiting
indication (MWI) when you do not answer or your phone
is in DND mode. The message icon will be displayed
on the LCD screen in LIP-8024D. If programmed, a
flashing MSG LED on the iPECS Phone also will
indicate when there is a Message Waiting. As a further
notification, a Message Wait Reminder Tone can be
provided. You may review and delete messages as well
as respond with a call back.
6.2 Getting Voice Mail Messages
When callers are forwarded or recall to your Voice Mail
Box, they can leave a voice message. Your Voice Mail
6. Send & Retrieve
Messages
To review your Station messages:
 Press the MSG button, the LCD shows the Message
Summary display:
1. ICM MWI(002)
2. VSF MSG(002)
3. VMS MSG(001)
BACK OK
 Dial 1 to view Station messages,
 Press the navigation up/down button to scroll through
the messages.
To return a call from the list of Intercom (MWI):
 Press the navigation up/down buttons to scroll through
the Intercom messages,
 Press the OK Soft button to select and place the return
call.
To delete a Station MWI:
 Press the navigation up/down buttons to scroll through
the Station messages,
 Press the Delete Soft button to select,
 Dial 1 (Delete MWI).
To delete all Station MWIs:
 Press the Delete Soft button,
 Press 3 (Delete All MWIs).