iPECS LIP-8012D - Network Config

LIP-8012D & LIP-8024D User Guide
10
2.1.4 Network Config.
The User can review the current network configuration
or modify a new phone network configuration.
To access Network Config. settings:
 Press MENU button and 2 (Network Config),
 Enter the password (default=147*); the following will
display:
MFIM #[1/2] ?
MFIM #1 - CHANGE[#]
 Press the # key to toggle between multiple profiles
(MFIM),
 Press the VOL   buttons to advance to the next
network configuration item,
 Press the HOLD/SAVE button to save each setting.
To set default Config. settings:
 In Network Config. Menu, use VOL   buttons to
locate the Default Config. Screen (shown),
SET DEFAULT CONFIG(DOT:*)
 Press the * key.
To exit Config. settings:
 Press the SPEAKER button,
 Press the * key to exit, or
 Press the # key to Reset/Reboot the phone with new
setting.