EasyManua.ls Logo

iPECS LIP-8012D - 8.7 Alarm;Door Bell

iPECS LIP-8012D
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LIP-8012D & LIP-8024D User Guide
62
9.2.2 Using ISDN Supplementary Services
ISDN service providers may incorporate features similar
to those of Centrex. These ISDN Supplementary
services are provided on a subscription basis, and as
with Centrex, are accessed using the Flash button on
an iPECS phone.
Using supplementary services an ISDN line can be
placed on Hold and a second call placed on the line.
You may then alternate between the two held calls
(Broker Call) using the hold button. An ISDN line
conference can be established using the Flash and
Conf Soft buttons. A conference can also be placed on
hold.
9.2.3 Activating ISDN Caller ID Restriction
iPECS Phone users can restrict the transmission of
Caller ID to the far-end. This may be a subscription
service of your carrier. Separate Flex buttons are
required to activate outgoing, Connected Line (COL),
and incoming, Calling Line ID (CLID) restriction.
To activate Keypad Facility operation:
Press the KEYPAD FACILITY button to switch to keypad
mode,
Dial as desired.
To deactivate Keypad Facility operation:
Press KEYPAD FACILITY,
OR
Press a Feature or Flex button.
While on an ISDN CO line, to access ISDN Supplementary
services:
Press Flash,
Press HOLD/SAVE, Conf, or CO line button to activate
the desired feature.
To restrict Caller ID:
Lift the handset,
Press programmed CLIR/COLR button to place call.

Table of Contents

Other manuals for iPECS LIP-8012D

Related product manuals