LIP-8012D & LIP-8024D User Guide
56
If the desired Page Zone is busy, the User can elect to
be recalled when their turn comes in the queue. Users
can also request a paged party answer the Page using
Meet-Me Paging. In this case, the paged party may
answer the page from any phone in the system by
dialing the Meet-Me code.
8.5 Push-To-Talk (PTT) Page
iPECS Phones can be assigned as a member of one or
more of the system’s nine Push-To-Talk (PTT) page
groups. Users separately log-in or log-out of any one or
all PTT groups to which the phone is assigned. Once
logged in, place or receive one-way page
announcements to/from other users who are logged in
to the same PTT group.
To make a page:
Lift the handset,
Dial the desired Page zone,
If assigned, after page warning tone, make
announcement.
To queue for a page when busy is received(iPECS-LIK):
Press the MSG button,
Replace the handset returning to idle.
To answer a Meet-me-Page:
Lift the handset.
Dial 544(iPECS-LIK)/546(iPECS-MG) (Meet-Me-Page
code).
To log-in to a PTT group:
Dial #0(iPECS-LIK)/538(iPECS-MG),
Dial the desired PTT group number (1-9 or 0 for all
groups),
To log-out of the PTT group(s):
Dial #0(iPECS-LIK)/538(iPECS-MG), the PTT Log-in/out
code,
Press the * key.
To place a page announcement to the active PTT group:
Press and hold the PTT Flex button,
After confirmation tone, make page announcement.
To Next Page
Loading...
