iPECS LIP-8012D - 4.3 Using Directory

LIP-8012D & LIP-8024D User Guide
37
4.3.5 Using Dial by Name and Entering Your Name
Dial by Name employs three different Directories:
Private directory (Station Speed dial), Public Directory
(System Speed dial), or Intercom directory.
NOTE—To allow others to contact you via the Intercom
directory, you must enter a name for your station (up to
12 characters).
To place a call using Station Speed Dial:
 Lift the handset, and/or press the DIR Soft button,
 Press the Speed Soft button(iPECS-LIK)/Dial ‘1’ for
station speed(iPECS-MG),
 Dial the desired Station Speed Dial bin number (00-
19 , 000-099 or 000-049).
To enter a Station Speed Dial number with CO Line and
Name:
 Lift the handset, and/or press the DIR Soft button,
 Press the Speed Soft button(iPECS-LIK)/Dial ‘1’ for
station speed(iPECS-MG),
 Press the ADD Soft button,
 Dial the desired Station Speed Dial bin number,
 Select/dial the CO/IP line/group,
 Dial the desired number to be stored,
 Press HOLD/SAVE,
 Enter the associated name if desired, using the
Character Entry Chart,
 Press HOLD/SAVE.
To assign a Station Speed Dial number directly to a Flex
button:
 Press TRANS/PGM,
 Press the desired Flex button,
 Select the Tel Num Soft button(iPECS-LIK)/Dial ‘1’ for
Number(iPECS-MG),
 Select/dial the CO/IP line/group,
 Dial the desired number,
 Press HOLD/SAVE,
 Enter the associated name if desired, using the
Character Entry chart(iPECS-LIK),
 Press HOLD/SAVE.