iPECS LIP-8012D - Page 21

LIP-8012D & LIP-8024D User Guide
15
In iPECS-MG
To use a Serial DSS:
 Set the Station’s Serial DSS Usage Map (Admin
PGM120-Flex2),
 Verify the DSS power is OFF (LIP-8048DSS only),
 Power-OFF the phone,
 Connect the serial DSS to the phone,
 Power-ON the phone and the DSS (LIP-8048DSS only),
 Program the DSS button using Web Admin
Programming or PGM126,
 Edit LSS label from Admin PGM126.
To initialize Serial DSS Database:
 Clear the Station’s Serial DSS Usage Map (Admin
PGM120-Flex2),
 Admin PGM120-Felx3 to reset the phone.
In iPECS-LIK
To use a Serial DSS:
 Verify the Station has Serial DSS Usage authority
(Admin PGM111-Flex21),
 Verify the DSS power is OFF (LIP-8048DSS only),
 Power-OFF the phone,
 Connect the serial DSS to the phone,
 Power-ON the phone and the DSS (LIP-8048DSS only),
 Program the DSS button using Web Admin
Programming or PGM115,
 Edit LSS label from Admin PGM129 (default label is
provided from MFIM).
To initialize Serial DSS Database:
 Enter Admin PGM111-Flex21,
 Select Station range to clear Serial DSS Database,
 Dial 0,
 Press the HOLD/SAVE button.