iPECS LIP-8012D - Page 41

LIP-8012D & LIP-8024D User Guide
35
each up to 48 digits. The iPECS-300 & 600 support 100
Station Speed Dial numbers (bins 000-099). The
iPECS-MG 100 & 300 each support 50 Station Speed
Dial numbers (bins 000-049). These numbers are
entered at the user’s station and may include several
‘special’ instructions. Special instructions and the
corresponding button are:
PAUSE will momentarily stop dialing.
FLASH as 1
st
digit—Activate dial tone detect.
FLASH not as 1
st
digit—The system will
generate a flash on the CO line.
MSG as 1
st
digit—Send digits as ISDN Keypad
Facility message.
‘*’ as 1
st
digit—Display Security, the stored
number will not be displayed when used.
‘*’ not as 1
st
digit—Dial Pulse to Tone
Switchover, the system will switch from
pulse to tone dialing.
When entering a Speed Dial, a 16 character name may
be associated with the number for Dial by Name.
Characters are entered with two keystrokes as in the
chart below.
Q – 11
Z – 12
. – 13
1 – 10
A - 21
B - 22
C - 23
2 - 20
D - 31
E - 32
F - 33
3 - 30
G – 41
H - 42
I - 43
4 - 40
J - 51
K - 52
L - 53
5 - 50
M - 61
N - 62
O - 63
6 - 60
P - 71
R - 72
S - 73
Q - 7*
7 - 70
T - 81
U - 82
V - 83
8 - 80
W - 91
X - 92
Y - 93
Z - 9#
9 - 90
*1 -
Blank
*2 - :
*3 - ,
0-00
#
Character Entry Chart(iPECS-LIK)