LIP-9002 User Guide - ST 5
5. Dial pad buttons: Use to dial a number, select a menu item, or input a
value.
6. Volume control button: Use to adjust Ring, Headset, Handset, and
Speaker volume.
7. Speakerphone button: Toggle the IP phone speakerphone On and Off.
8. Flexible buttons: These buttons are assigned to access outside Lines
or features.
LIP-9002 has 4-flexible buttons.
9. Fixed buttons
Transfer (PGM) button: Transfers the current active call. Also,
accesses the User Program menu from the idle state or switches the
dial pad input mode in the input screen. The dial pad mode displays
in the lower right corner (ABC, abc, or 123).
Speed button: Use to assigns your speed dial numbers.
Message (Call Back) button: When the MWI LED indicates you
have a message, use to access your Voice Mail server. Initiates call
back request when calling a busy station; call is completed when
busy station returns to idle status.
Headset button: When using a headset, this button toggles the
headset state.
Hold (Save) button: Use to place a call on Hold. Also, use to
access a held call. In User Program menu mode, it saves your inputs.
Mute button: Toggles audio from the microphone to the connected
party On and Off.
DND (Do Not Disturb): Use to activate DND so that your phone will
not ring. The button also deletes the last character of an input in the
menu mode.
To Next Page
Loading...
