iPECS LIP-9002 - 5.4.1 Setting up a Conference Room

32 LIP-9002 User Guide - ST
 Press the assigned CONF flexible button again to establish the
conference.
To place a Conference on Hold:
 Press the HOLD (SAVE) button.
To retrieve the Conference from Hold:
 Press the assigned CONF flexible button.
To establish an Unsupervised Conference:
 Establish conference with two external parties,
 Press the assigned CONF flexible button,
 Hang-up the handset.
To retrieve an Unsupervised Conference:
 Lift the handset,
 Press the assigned CONF flexible button.
5.4.1 Setting up a Conference Room
In addition to establishing an ad-hoc Conference, up to 9 Conference
Rooms can be set up, letting up to 32 parties converse when using a
Conference module. When setting up a Conference Room, a password
can be designated for invited parties (internal and external parties) to use
for accessing the established Conference Room.
To set-up a Conference Room:
 Press the TRANSFER (PGM) button,
 Dial 53 to create a Conference Room,
 Dial the desired Conference Room number (1-9),
 To assign a password for the Conference Room, enter the password (up
to 5 digits),
 Press the HOLD (SAVE) button to establish the Room.
To join a Conference Room:
 Lift the handset,
 Dial 59, the Conference Room entry code,
 Dial the Conference Room Number,
 Dial the Conference Room password.