iPECS LIP-9002 - 4.3.5 Using Dial by Name and Entering Your Name

LIP-9002 User Guide - ST 27
 FLASH as 1st digit will activate dial tone detect.
 FLASH not as 1st digit will generate a flash on the outside line.
 SPEED as 1st digit sends the remaining digits as ISDN Keypad Facility
message.
 ‘*’ as 1st digit enables Display Security and the stored number will not
be displayed when used.
 ‘*’ not as 1st digit activates Dial Pulse to Tone Switchover; the system
will switch from pulse to tone dialing. Pulse to tone conversion is only
activated on outside lines configured for pulse dialing.
When entering a Speed Dial, a 16-character name may be associated with
the number for Dial by Name.
To place a call using Station Speed Dial:
 Press the SPEED button,
 Dial the desired Station Speed Dial bin number (000-099).
Or
 Press the assigned Station Speed Dial button.
To enter a Station Speed Dial number with outside Line and Name:
 Press the TRANSFER (PGM) button and the SPEED button.
 Dial the desired Station Speed Dial number,
 Select/dial the outside line or group number,
 Dial the desired number to be stored,
 Press the HOLD (SAVE),
 Enter a name up to 16 characters, if desired. For details on character
entry, see 1.6 Entering Text
 Press the HOLD (SAVE).
.
4.3.5 Using Dial by Name and Entering Your Name
Dial by Name employs three different Directories: Private directory (Station
Speed dial), Public Directory (System Speed dial), or Station Name
(Intercom directory).