22 LIP-9002 User Guide - ST
4.1.1 Using Camp-On when calling a busy station
If the called party is busy, you may activate Camp-On, Callback or, if
allowed, Voice-Over to the station.
Camp-On allows you to wait off-hook for the called station to answer.
Callback allows you to hang-up, and when the busy station returns to an
idle state, the system will call your Station. After you answer the callback,
the system will call the previously busy station.
Voice-Over allows you to make an announcement to the busy user by
combining your voice with the other party connected to the busy user.
To Camp-On (wait off-hook) for a busy station:
Press * and await an answer.
To request a Callback (wait on-hook) for a busy station:
Press the MESSAGE (CALL BACK) button and hang-up.
To make a Voice-Over announcement to a busy station:
Dial #,
After the Splash tone is heard, begin speaking.
4.1.2 Leaving a Message Wait
If the called user does not answer or is in DND mode, you may leave a
Message Wait. The called user will receive a Station Message Wait
indication.
To activate Message Waiting:
When calling a number that is busy or in DND mode, press the
MESSAGE (CALL BACK) button and hang-up.
4.1.3 Leaving a Voice Mail
If the called user does not answer, you may leave a Voice message in the
user’s mailbox. The called user will receive a Message Wait indication.
To Leave a Voice Mail Message Waiting:
When calling a station that does not respond, press the MESSAGE (CALL
BACK button.
Await the user’s mailbox greeting.
At the tone, leave your voice message and hang-up.
To Next Page
Loading...
