38 LIP-9002 User Guide - ST
To activate a registered mobile phone:
Press the TRANSFER (PGM) button,
Dial 38, the Mobile Extension feature code,
Dial 1 to activate, 0 to deactivate,
Press the HOLD (SAVE) button.
To place a call from the mobile extension using the iPECS System:
Dial the DID phone number for your station; the system will check the
Caller ID, answer the call, and return intercom dial tone,
Place the internal or external iPECS call as normal.
To Transfer a call from the mobile extension using the iPECS:
Dial “*” while on an iPECS call,
Dial the desired station, the call is transferred and the mobile phone
returns to idle.
Reconnect to the transfer by pressing the # key.
NOTE
This feature is only available when the DID number is serviced by an ISDN
or SIP outside line. Check with your system administrator to determine if the
Mobile Extension feature is available to you.
To Next Page
Loading...
