ISHIDA IGB Series User Manual

4.2 Set Value List
page 24 IGX/IGB Series Operation Manual No. 0202A
4.2 SET VALUE LIST
 IGX Series
Setting
No.
Description of Setting
Setting
Value No.
Setting Condition
00 All key valid F01 Key selection
01 ON/OFF key invalid
(Always scale operation status when the
power is turned ON)
00 No function F02 Automatic call of preset number
01 Preset No. 1 is automatically called when
power supply is turned ON.
F03 No function
F04 No function
F05 No function
F06 No function
F07 No function
F08 No function
F09 No function
F10 No function
F11 No function
F12 No function
F13 No function
F14 No function
F15 No function
00 During stable weighing outside limit
01 During stable weighing under "OK" condition
02 During stable weighing under "OVER"
condition
03 No buzzer sounds even when key input is
made.
04 Buzzer sounds when key input is made and
during stable weighing.
05 Buzzer sounds only when key input is made
F16 Buzzer sounding
(When the buzzer is installed)
06 Upper/lower limits discrimination function
(during stable/unstable weighing)
00 No function
01 10 minutes
02 20 minutes
03 30 minutes
04 40 minutes
05 50 minutes
F17 Automatic power-off time
06 60 minutes
NOTE Shaded areas are factory default settings.

ISHIDA IGB Series Specifications

General

Brand	ISHIDA
Model	IGB Series
Category	Scales
Language	English