ISHIDA IGB Series - Weighing PLUS

3.2 Weighing PLUs
page 18 IGX/IGB Series Operation Manual No. 0202A
3.2 WEIGHING PLUs
1
When the power is turned OFF,
IGX Series IGB Series
press the ON/OFF key to turn on the power, the self-diagnosis display appears, then stop
at the initial display with “ZERO” indicator lit.
IGX Series IGB Series
Ä
NOTE If “ZERO” indicator is not lit, press the ZERO key to initialize the display.
Press the SET key, then “PLU 1” appears on the display.
IGX Series IGB Series
2
Ä
If necessary, repeat to press either the ZERO (+) or TARE (-) key until the desired PLU No.
appears on the display.
[Example] Selecting PLU 2
IGX Series IGB Series
or
Ä