ISHIDA IGB Series User Manual

1.3 Installation
page 6 IGX/IGB Series Operation Manual No. 0202A
5
Carefully carry and place the Weigh Platter over
the Platter Support.
Leveling the Scale
Use the level adjuster until the air bubble inside the level is positioned in the center of the circle.
Adjusting the Display Unit Angle
After loosening the display unit tightening knob, adjust the unit to an easy-to see angle. Then
re-tighten the knob.

ISHIDA IGB Series Specifications

General

Brand	ISHIDA
Model	IGB Series
Category	Scales
Language	English