EasyManua.ls Logo

IsoMatic 500 - Excerpt from the Declaration of Incorporation 132 15 Technical Data

IsoMatic 500
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TR10K009 RE / 02.2016
133
15 Technical data
Mains voltage 230 / 240V, 50/60Hz
Standby Approx. 6W
Protection category Only for dry rooms
Temperature range –20°C to +60°C
Automatic safety cut-out Is automatically taught in for
both directions separately.
End-of-travel position
cut-out/power limit
ō Self-learning, wear-free,
asit has no mechanical
switches.
ō Additionally integrated
travel time limit of
approx.45 s
ō Readjusting automatic
safety cut-out for every
door run.
Rated load See data label
Pull and push force See data label
Motor Direct current motor with hall
sensor
Transformer With thermal protection
Connection ō Simple screw terminal
ō Max. 1.5mm
2
ō For internal and external
buttons with impulse
operation
Special functions ō Operator light,
2-minutelight
ō 2-wire photocell
canbeattached
Emergency release Actuated with pull cord in the
event of a power failure
Remote control ō 2-button hand transmitter,
RSC2 (433.92MHz)
ō Integrated radio receiver
with 6 memory spaces
Door travel speed approx. 10.5cm/s (depending
on door size and weight)
Airborne sound emission
of the garage door
operator
The equivalent continuous
sound pressure level of 70dB
(A-weighted) is not exceeded
at a distance of 3 metres.
Boom ō Two-part
ō With maintenance-free,
patented toothed belt
ENGLISH

Table of Contents