Isuzu C240 - Page 10

TCM £SHOoP MANUAL
NOTE:
1. These specifications are based on the standard model engine.
2. Specifications for items marked with asterisk (*) will vary according to the type of equipment on
which the engine is installe
. As the fuel injection timing crank angle differs depending on an engine application, respective
engine's timing crank angle, when necessary, should be asked ISUZU MOTORS LIMITED via the
machine supply source or the engine supply source. In such case, be sure to give the supply source
full information on your engine's identification such as the engine number etc. which is
stamped or affixed on the engine.
»
DESIGN FEATURES AND GENERAL OUTLINE
. General Outline of ISUZU C240 Diesel Engine
The
model
C240
which
has
been
used
by
various
original
equipment
manufactures
is
one
of
a
main
industrial
diesel
in
ISUZU's
own
engine
line-up.
Its wide versatility and superior long engine life which are brought by the simple engine construction
and easy maintenance is a reason why the C240 is welcomed to the world wide industrial engine
market.
2. Main Engine Parts and Their Features
It
is
consists
of
a
mono-block
casted
cylinder
block
with
five
crankshaft
journal
supporting
bulbheads
and detachable crankcase along with a stamped oil sump. The cylinder bores are of a dry type
Chromard Liner.
The cylinder head is also of a mono-block casted type with an antechamber cavity to form a swirl
combustion chamber along with the press-in heat plug per cylinder, The intake ports and exhaust
ports are arranged at the engine left hand side giving a superior maintenance accessibility at the
engine RH side.
. Fuel System .
This engine uses the Bosch in-line A type injection pump of distributor VE type injection pump
depending
on
the
engine
application.
A
variable
speed
control
RSV
type
mechanical
governor
is
mainly equipped on the in-line injection pump and, a semi-variable speed control type mechanical
govenor is equipped on the distributor type injection pump.
A built-in feed pump is equipped on the in-line type, while the distributor type has no feed pump,
which is remotely installed on the water sedimentor.
»