Isuzu C240 - Reassembly 2 Nd Step

TCM SHOP MANUAL
REASSEMBLY 2ND STEP
fe] Reassembly Steps
& 1. Oilpan a9.
4 2. Cylinder head gasket 410.
& 3, Cylinder head an.
& 4. Push rod a2.
4 5. Rocker arm shaft bracket and a13.
rocker arm ais.
A 6. Valve rocker oil feed pipe ais.
‘4 7. Tappet chamber cover até.
‘4 8. Injection pump (In-line type) ai7.
& 8a Injection pump (Distributor type) -& 18.
with bracket
= 107-
Idler gear
Water pump
Thermostat housing
Water by-path pipe
Crankshaft oil thrower
Crankshaft pulley
Timing gear case
Injection nozzle
Glow plug
Cylinder head cover