Isuzu C240 - Model Identification; Injection Pump Identification

TCM. SHoP MANUAL
fv
Position of Engine type
Position of Engine number
Pe se annsne
(LICENCE BOSCH)
@--\dentitcstion number
In-line type
Distributor type
IDENTIFICATIONS
MODEL IDENTIFICATION
Engine Serial Number
The engine number is stamped on the right hand side of
the cylinder body.
INJECTION PUMP IDENTIFICATION
Injection Pump Number
Injection volume should be adjusted after referring to
the adjustment data applicable to the injection pump
installed.
The injection pump identification number (A) is stamped
on the injection pump identification plate.
Note:
Always check the identification number before be-
ginning a service operation.
Applicable service data will vary according to the
identification number. Use of the wrong service data
will result in reduced engine performance and engine
damage.
® DKC (Manufacturer of the injection pump) identifi-
cation number
ISUZU Parts Number
-13-