Isuzu C240 - Page 7

TCM sHOP MANUAL
7. Below is a sample of the text of the Workshop Manual.
ete Gear: 1.8526 001 6mq—__-—~}
4 Maahie the height of the wave guide upper eng
trom he woe tac ofthe eytnder hens
ee
\
"ave Guide Uno Ena
cy woe anc gan an aS.
—t trati
Valve
Gulde
Instlation—<—————
rt
tration,
7 Tinea the vive gue utr ae wh engi o
This is the item shown in the illus-
It is marked with a triangle
(A) on the Major Components page.
Special tools are identified by the
tool name and/or number.
The illustration shows how the spe-
cial tool is to be used,
N Letters and numbers contained in a
circle refer to the illustration.
NI Symbols indicate the type of service
operation or step to be per-
formed. A detailed explanation of
these symbols follows.
Service data and specifications are
given in this table.
8. The following symbols appear throughout this Workshop Manual. They tell you the type of service
operation or step to perform.
Removal
Installation
Disassembly
Reassembly
Alignment (Marks)
Directional Indication
Teas
Inspection
Measurement
V
a
Liquid Gasket Application
Adjustment
Cleaning
Important Operation Requiring Extra
Care
Specified Torque (Tighten)
Special Tool Use Required or Rec-
ommended (Isuzu Tool or Tools)
Commercially Available Tool Use
Required or Recommended
Lubrication (Oil)
Lubrication (Grease)