EasyManua.ls Logo

Ithaca ITHERM 280 - Table 31 Automatic Status Back (ASB) Third Byte (Paper Sensor Information); Table 32 Automatic Status Back (ASB) Fourth Byte (Paper Sensor Information); Table 33 Paper Sensor Status (<N> = 1, 49)

Ithaca ITHERM 280
349 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Programming Codes iTherm
®
280 Programmer’s Guide
Page 212 Rev C 28-07764
Bit Off/On Hex Decimal Status for Automatic Status Back (ASB)
0 Off 00H <0> Journal memory adequate
On 01H <1> Journal memory low (Less than 8K)
1 Off 00H <0> Paper low sensor: paper adequate
On 02H <2> Paper low sensor: paper low
2 Off 00H <0> Journal memory adequate
On 04H <4> Journal memory exhausted.
3 Off 00H <0> Paper out sensor: paper present
On 08H <8> Paper out sensor: paper not present
4 Off 00H <0> Not used; fixed to Off
5,6 - - - Undefined
7 Off 00H <0> Not used; fixed to Off
Table 31 Automatic Status Back (ASB) Third Byte (Paper Sensor Information)
Bit Off/On Hex Decimal Status for Automatic Status Back (ASB)
0-3 - - - Undefined
4 Off 00H <0> Not used; fixed to Off
5,6 - - - Undefined
7 Off 00H <0> Not used; fixed to Off
Table 32 Automatic Status Back (ASB) Fourth Byte (Paper Sensor Information)
Function Transmit Status
ASCII [GS] r <n>
Hexadecimal 1DH 72H <n>
Decimal <29> <114> <n>
Range 1 ≤ n ≤ 2
49 ≤ n ≤ 50
Description The [GS] r <n> command transmits the status specified by <n> as follows: paper
sensor status as one byte of data when <n> = 1 or 49, and drawer kick-out
connector status when <n> = 2 or 50. The paper present status of bits 2 and 3
for the paper sensor status is not transmitted because the printer goes off line
when a paper out is detected by the paper out sensor. The paper roll low sensor
is an option. If the sensor is not installed, bits 0 and 1 for the paper sensor status
are always in the “Paper adequate” status.
Bit Off/On Hex Decimal Status
0 Off 00H <0> Journal Memory adequate
On 01H <1> Journal Memory low (Less than 8K)
1 Off 00H <0> Paper low sensor: paper adequate
On 02H <2> Paper low sensor: paper low
2 Off 00H <0> Journal Memory adequate
On 04H <4> Journal Memory exhausted.
3 Off 00H <0> Paper out sensor: paper present
On 08H <8> Paper out sensor: paper not present
4 Off 00H <0> Not used; fixed to Off
5,6 - - - Undefined
7 Off 00H <0> Not used; fixed to Off
Table 33 Paper Sensor Status (<n> = 1, 49)

Table of Contents

Other manuals for Ithaca ITHERM 280

Ithaca ITHERM 280 - Table 31 Automatic Status Back (ASB) Third Byte (Paper Sensor Information); Table 32 Automatic Status Back (ASB) Fourth Byte (Paper Sensor Information); Table 33 Paper Sensor Status (<N> = 1, 49)