iTherm
®
280 Programmer’s Guide Specifications and Requirements
28-07764 Rev C Page 21
iTherm
®
280 Specifications and Requirements
iTherm® 280 Thermal Printer Models
• iTherm
®
280-P: parallel interface printer
• iTherm
®
280-S: serial interface printer
• iTherm
®
280-USB: USB interface printer
Standard Features
The following features are common to the entire family of thermal printers:
• Print Speed for text is 8 inches per second (200 mm/sec) (monochrome)
• 8.0 inches per second paper feed speed
• 3.15 inch (80 mm.) print zone
• 44/57 characters per line
• Built-in self-ranging External Power supply
• Clam-shell paper loading
• Single RJ11 cash drawer driver with status (Single RJ12)
• Parallel (25 or 36 pin), serial (9 or 25 pin) RS232C, and USB interface
• Configurable receiver buffer
• Self diagnostics
• Set up and configuration utility program
To Next Page
