Ithaca ITHERM 280 - Page 277

iTherm
®
280 Programmer’s Guide ITherm® 280 Unicode and Fonts
28-07764 Rev C Page 275
[ESC] + P,
[ESC] + p
Width
Not Zero
From
Command
From
command
Based on
set character
spacing
command
Will be used if
previously set
and character
spacing is not
being defined
by the font
[ESC] + I,
[ESC] + i
Value 0
No eff
ect
No effect
From Font
Set Off but has
no effect
[ESC] + I,
[ESC] + i
Value
Not zero
No effect
No effect
From
Command
Set Off
[ESC] + J,
[ESC] + j
Value 0
No effect
No effect
From Font
Set On but has
no effect
[ESC] + J,
[ESC] + j
Value
Not zero
No ef
fect
No effect
A multiple of
the value
defined by the
command
Set On
[ESC]I <n>
From
POR.INI
definition
From
POR.INI
definition
As defined by
command
Will be used if
previously set.