Ithaca ITHERM 280 - Page 310

Communications iTherm
®
280 Programmer’s Guide
Page 308 Rev C 28-07764
where X is a model definition. X will be 3 if the printer is in the native iTherm
®
280
emulation. 5 indicates that the printer is in some other emulation. Y and Z are bit fields
that designate the options attached to the printer.
Bit
Y
Z
Bit 0 Color Support active 0
Bit 1 Undefined Knife module attached
Bit 2 Undefined 0
Bit 3 0 0
Bits 4-5 1 1
Bits 6-7 0 0