iTherm
®
280 Programmer’s Guide Programming Codes
28-07764 Rev C Page 81
Description
ASCII Hex IPCL equivalent
code
Page
Set left/right margins.
n1 = Left margin
n2 = Right margin
[ESC] X <n
1
><n
2
> 1BH,58H none 161
Clear print buffer.
[CAN] 18H &%RP 162
Query marker.
[ESC] q <n> 1BH,71H none 162
Open cash drawer.
n=1 Cash Drawer 1
n=2 Cash Drawer 2
[ESC] x <n> 1BH,78H &%D1 {n=1}
&%D2 {n=2}
163
Perform Auto Cut
[ESC] v 1BH,76H &%FC 163
Audio alert.
[BEL] 07H &%BL 164
Configure audio alert.
[ESC] [BEL] <n
1
>
<n
2
> <n
3
>
1BH,07H none 164
Print suppress
and data pass through.
[ESC] < <n> 1BH,3CH &%PT <n> 166
Initialize printer.
[ESC] @ 1BH,40H none 163
Enable paper error mode operation.
[ESC] p <n> 1BH,70H &%PE <m
1
>
<m
2
>
164
Enable dynamic response
[ESC] w <n> 1BH,77H none 154
Begin multi-drop control.
[SOH] <n> 01H none 170
Inquire status. (Refer to command
descriptions.)
[ENQ] <n> 05H none 172
Inquire cash drawer 1 status
[ENQ] <1> 05H01H none 172
Control Periodic Status
[ESC][EM]P 1BH, 19H,
50H
none 179
Control Periodic Status
[ESC][EM]p 1BH, 19H,
70H
none 179
Extended Diagnostics
Set control feature commands.
[ESC] y <n> 1BH,79H &%Y0 - 9 or
&%YX<m1>
<m2><m3> (for
numbers >9)
167
Extended diagnostics.
[ESC] ~ <n> 1BH,7EH none 168
To Next Page
Loading...
