ITRON ERW-1601-001 User Manual

6. Insert the connectors and wires into the splice tube until the connectors and wires are
completely immersed in the non-conductive gel material.
7. Separate the cable wires to the sides and close the splice tube cover.
8. Remove any leftover materials from the customer premises.
08 January 2020 815-0006-01 Itron, Inc. Page 47 of 48
Template 7 Completing Gel-cap Connections Using the Itron Splice Kit

ITRON ERW-1601-001 Specifications

General

Brand	ITRON
Model	ERW-1601-001
Category	Control Unit
Language	English