–
Check revs: 2
–
Other revs: 1
–
Exercise revs: 1
–
Revs unit volume: 4
–
Jog rate: 50
–
Max press diff: 0.5
–
Miscellaneous utility-specific parameters as required (covered in Step 9)
9. Verify or enter the TOLERANCE values for POS, NEG, Slope, Repair, and Meter Size.
These settings (values) are utility-specific.
08 July 2020 815-0154-00 REV 000 Itron, Inc. Page 25 of 66
Intelis Gas Meter Proving and Setup Guide
4 Proving the Intelis Gas Meter Using the Honeywell SNAP Proving
System
To Next Page
Loading...
