ITRON Intelis - Proving with Energy Economics (EEI) System

18. Verify or enter the InTest and OutTest limit values for Open Limits, Check Limits, Other
Limits, and Delta Limit. The Open, Check, Other, and Delta Limit settings (values) are utility-
specific.
19. Verify or enter the limit values for Check Dif Limits, MonitorPeaks?, andMaxPeak.
The Check Dif Limits, Monitor Peaks?, andMaxPeak settings (values)are utility-specific.
08 July 2020 815-0154-00 REV 000 Itron, Inc. Page 42 of 66
Intelis Gas Meter Proving and Setup Guide
5 Proving the Intelis Gas Meter Using the Measurement Systems
Proving System