20. Verify or enter Tangent Adjustment: Tangent Type.
Note: The Tangent Adjustment: Tangent Type setting can be any non-blank value. The
Tangent Adjustment: Tangent Type value is not used to prove the Intelis Gas Meter.
21. Select the Global tab and Display Method for your meter results. Display Method options are
listed.
–
Error
–
Accuracy
–
Proof
08 July 2020 815-0154-00 REV 000 Itron, Inc. Page 43 of 66
Intelis Gas Meter Proving and Setup Guide
5 Proving the Intelis Gas Meter Using the Measurement Systems
Proving System
To Next Page
Loading...
