Operation Manual – ITW GSE 7400 Battery Powered GPU
90 kVA
General Description
Document No. 575.410DB Page 28 of 195
3.6 Indication Beacons
Unit Operation / Charging (H1) & Warning / Low Battery (H2):
Various beacons/labels may be located on top of the canopy of the unit.
Picture shows standard color configuration.
Depending on costumers’ preferences, the beacons can be either permanently lit or blinking.
The tone level is set to high as standard.
3.7 Beacons Permanent / Flashing programing
Changes according to connections below.
Note
Red square is factory default settings.
To Next Page