What to do if my Ivy Biomedical Systems 3150-B Medical Equipment unit does not turn on?
If your Ivy Biomedical Systems Medical Equipment unit does not turn on, please verify the following: Ensure the power cord is securely plugged into both the monitor and the AC outlet. Check that the line voltage selector is in the correct position. Confirm that the fuses are not blown. Make sure the ON switch is pressed.
Why is the trigger pulse not functional on my Ivy Biomedical Systems 3150-B Medical Equipment?
If the trigger pulse is not functional on your Ivy Biomedical Systems Medical Equipment, make sure that the auxiliary port connector is properly plugged into the monitor. Also, ensure that the ECG size is optimal by selecting Lead II.
What to do if I see an erratic ECG waveform and the heart rate is not counting on my Ivy Biomedical Systems 3150-B Medical Equipment?
If you observe an erratic ECG waveform and the heart rate is not counting on your Ivy Biomedical Systems Medical Equipment, verify the following: Ensure the ECG waveform has sufficient amplitude by selecting Lead II. Check the correct placement of the electrodes. Confirm that the ECG electrodes have enough conductive gel.
How to fix the System Interlock symbol that does not show connection on Ivy Biomedical Systems Medical Equipment?
If the System Interlock symbol does not show a connection on your Ivy Biomedical Systems Medical Equipment, verify that the auxiliary port is properly connected.
Guidance on how to effectively use the manual's content and structure.
Outlines the manufacturer's obligations and limitations regarding product safety and performance.
Discusses electrical safety precautions, grounding, and power connection requirements.
Warns against using the equipment in the presence of flammable anesthetics or substances.
Details safe practices for connecting patients, including isolation and lead wire safety.
Specifies that the device should not be used within an MRI magnetic field and advises on pacemaker use.
Explains protection against electrosurgery potentials and defibrillator discharge.
States certification for emissions and immunity according to IEC-60601-1-2.
Lists recommended accessories like patient cables and lead wires for the device.
Specifies the minimum physiological R-wave signal amplitude required for accurate readings.
Provides guidelines and declarations for electromagnetic immunity compliance.
Explains various symbols used on the monitor and in its documentation for clarity.
Provides a table summarizing the main features and options of the Model 3150-B.
Details the device's classification regarding electrical shock, ingress of water, and flammable mixtures.
Identifies and explains the function of basic keys, switches, and connectors on the front panel.
Explains the function of programmable keys used for menu navigation and activating functions.
Illustrates the navigation path through the monitor's menu system for various functions.
Describes the information displayed on the monitor, including heart rate, ECG trace, and system status.
Explains the meaning and display of various alarm messages, including pause and lead off conditions.
Identifies and explains the various connectors and features present on the rear panel of the monitor.
Specifies the type and rating of fuses used in the monitor for replacement.
Provides step-by-step instructions for initially setting up the monitor for use.
Details the procedure for adjusting the monitor's voltage setting to match the local power supply.
Explains how to change the language displayed on the monitor's menus and messages.
Guides the user through setting the monitor's internal clock, date, and audio volume levels.
Describes how to adjust the speed at which the ECG waveform is displayed and recorded.
Explains how to reset the monitor to its factory default configuration and lists default values.
Explains the R-wave synchronized trigger pulse output and its availability on connectors.
Describes how the ECG waveform is highlighted to indicate the trigger pulse timing.
Details the P-Lock feature for improving R-wave detection accuracy and reducing false triggers.
Highlights critical safety precautions related to ECG monitoring and patient connections.
Provides detailed procedures and recommendations for connecting ECG electrodes to the patient.
Discusses different types of ECG electrodes and recommends specific ones for optimal performance.
Explains the process and importance of measuring ECG electrode impedance for signal quality.
Details how to adjust the amplitude or size of the ECG waveform displayed on the screen.
Describes how to select different ECG leads (I, II, III) for monitoring.
Explains the "LOW SIGNAL" message and details how to activate the ECG notch filter.
Guides the user on setting alarm limits and activating pacemaker detection.
Describes the visual indicators for connection status between the monitor and the CT scanner.
Explains how patient ID and other data are transmitted and displayed via Ethernet mode.
Details the process of downloading ECG and impedance data to a USB memory stick.
Provides important safety and usage notes regarding the USB port and compatible memory devices.
Provides step-by-step instructions for replacing the thermal paper roll in the recorder.
Explains the different printing modes available for the recorder, such as Direct, Timed, and X-RAY.
Details how to adjust recorder speed and shows example printouts from different modes.
Explains the meaning and display of various alarm messages, including pause and lead off conditions.
Describes the integrated ECG simulator used to test the monitor's functions and connections.
Provides a troubleshooting guide for common problems and their potential solutions.
Provides instructions for cleaning and maintaining the exterior surfaces of the monitor.
Details the procedure for cleaning patient cables, emphasizing not to submerge them.
Outlines essential checks and maintenance tasks for the ECG monitoring system.
Lists ECG-related accessories, including patient cables, lead wires, and electrodes.
Provides guidance on the proper disposal of the device and consumables according to regulations.
Details the technical specifications for the ECG monitoring function, including lead selection and response.
Lists the specifications for the cardiotachometer, covering range, accuracy, and sensitivity.
Specifies parameters for rejecting pacemaker pulses and lists configurable alarm limits.
Details specifications for simulator, test mode, display, and data transfer features.
Outlines specifications for Ethernet, recorder, environmental, and mechanical aspects of the device.
Details power input requirements and the regulatory standards the device meets.
Lists hazardous substances present in various components and their concentration levels.
Provides step-by-step instructions for installing the Model 3150-B monitor.
General| Category | Medical Equipment |
|---|---|
| Parameters | ECG, NIBP, SpO2, Temperature, Respiration |
| Display | LCD |
| Alarms | Yes |
| Power Supply | AC Power or Battery |
To Next Page
