Ivy Biomedical Systems 7600 User Manual

MONITOR SETUP
Model 7600/7800 Operation Manual
21
7.7 Default Settings
To reset the monitor to the default settings, turn the monitor off by pressing the Power On/Standby switch; then
turn the monitor back on by again pressing the Power On/Standby switch.
Setting
Initial Default
Language Setting
English (Configuration Dependent)
ECG Size
10mm/mV
Trigger Lead
II or Auto (Configuration Dependent)
Second Lead
I
Filter
ON
Impedance Threshold
50kΩ (Configuration Dependent)
Heart Rate Low Limit
30
Heart Rate High Limit
120
Trace Speed
25mm/sec
Recorder
Direct
QRS Volume
Off
Alarm Volume
Medium
Internal Test
Off
Simulator Rate
Off
Alarms
30 Seconds or Off (Configuration Dependent)
Trigger Polarity
Positive or Negative (Configuration Dependent)
P-Lock
On or Off (Configuration Dependent)
Pacer Detection
On or Off (Configuration Dependent)
Default/Stored settings may be customized (password required) by a Responsible Organization. For information on
how to activate this feature, contact Ivy Biomedical Systems at (203) 481-4183.

Ivy Biomedical Systems 7600 Specifications

General

Brand	Ivy Biomedical Systems
Model	7600
Category	Medical Equipment
Language	English