RECORDER OPERATION
34 Model 7600/7800 Operation Manual
12.2 Recorder Modes
Use the following procedure to select the recorder mode to be used. Selections are DIRECT, TIMED, DELAY, and
XRAY.
1. Press the [OPTIONS MENU] touch key from the main menu. .
2. Press the third programmable touch key [REC MODE] to select the recorder mode.
All Recorder Modes - To print, press the [PRINT] key in the main menu. Press [PRINT] again to stop
printing.
Direct - To print in DIRECT recorder mode, press the [PRINT] key in the main menu. Press [PRINT]
again to stop printing.
The plot contains parameter settings and the time/date.
The speed of the plot and vertical resolution are the same as the display. The plot is labeled with the speed
of the plot in mm/s, the recorder mode and the parameters.
Timed - TIMED mode starts by pressing PRINT and prints for 30 seconds.
Delay - Delay mode automatically prints 30 or 40 seconds of ECG waveform after the occurrence of an
alarm condition depending on the speed selected:
15 seconds before and 15 seconds after at 50mm/s
20 seconds before and 20 seconds after at 25mm/s