Now it is in Bluetooth pairing mode. Go to Bluetooth setting on your device
and select Elite MK300 for keyboard, MK300 Mouse for mouse. Follow the
onscreen instructions to complete the pairing. The light will turn off once
Bluetooth pairing is successful.
5/8
3s
Hold the BT3 key for more than 3 seconds
until the white light flashes quickly.
Press the BT3 key, the white light flashes
once.
Blue
Red Red
OFF
Indicator Light
Red LED light will flash when power is low.
Blue LED light will be on when charging.
LED light will be off when fully charged. Full charging time is approximately 4 hours.
To Next Page
Loading...
