J.P. Instruments EDM-960

For Your Safe Flight Page | 46
Engine Constant 13.7
1  99
Hold NEXT and button 2 until you
see ADJUST for two seconds.
Tap PLUS or MINUS to adjust.
Hold NEXT and button 2 to Save.
Use 14.9 for non-turbo’d and
turbonormalized and 13.7 for
turbocharged engines.
LOP DFLT? N
YES or NO
Tap YES to make LOP your default
setting. Tap NO to keep ROP your
default setting.
SWAP DIALS? N
YES or NO
Tap YES to swap gauge positions
or NO to keep it the way it is,
unless it already says YES in which
case you tap NO to swap gauge
positions.
CO GUARDIAN? Y
YES or NO
Select YES or NO and hit NEXT to
go to the next item. Note: This
feature requires a factory
modification to the EDM-930 and
will come with a connection
diagram.
FDR OUTPUT? Y
YES or NO
Allows recording output. Select
YES or NO and hit NEXT to go to
the next item.
END? Yes
NO or YES
YES exits the pilot program mode.