Jackson Conserver AXL User Manual

Conserver XL Series Technical Manual 7610-002-10-23
Issued: 11-28-2007 Revised: N/A
SECTION 5: PARTS SECTION
CANTILEVER ARM (DOUBLE BRACKET MOUNT) (CONTINUED)
48
ITEM QTY DESCRIPTION Mfg. No.
1 1 Arm, Cantilever, Conserver XL (Prior to S/N 04D10286) 05700-002-00-20
1 1 Arm, Cantilever, Conserver XL (Starting with S/N 04D10286) 05700-031-50-67
1 1 Arm, Cantilever, Conserver AXL 05700-003-52-91
1* 1 Arm, Cantilever, Conserver XL2 05700-002-60-65
2 1 Spring Pin, 1/4” Dia. x 1 1/8” Long 05315-407-06-00
3 2 Yoke Assembly 05700-000-75-77
3a 1 Cotter Pin 05315-207-01-00
3b 1 Yoke 05700-000-75-78
3c 1 Clevis Pin, 5/16” x 1 3/8” 05315-700-01-00
3d 2 Nylon Washer 05311-369-03-00
3e 1 Bushing 03120-100-03-00
3f 2 Locknut, 3/8”-16 S/S Hex Center 05310-256-04-00
4 2 Rod, Spring, Conserver XL (Prior to S/N 04D10286) 05700-000-69-45
4 2 Rod, Spring, Conserver XL (Starting with S/N 04D10286) 05700-002-10-52
4 2 Rod, Spring, Conserver XL2 05700-002-29-38
5 2 Spring, Conserver XL 05340-109-02-00
5 2 Spring, Conserver XL2 05340-109-02-00
6 2 Bolt, Hanger Eye 3/8"-16 05306-956-05-00
7 2 Washer, Impeller 3/8” I.D. x 7/8” O.D. 05311-176-02-00
8 4 Nut, 3/8”-16 S/S Hex 05310-276-01-00
9 2 Cantilever Arm Connector 05700-011-90-99
10 2 Screw, 1/4"-20 x 1 1/2" Long S/S 05305-274-23-00
11 2 Washer, 1/4" ID S/S 05311-174-01-00
12 2 Locknut, 1/4”-20 S/S Hex with Nylon Insert, Low Profile 05310-374-02-00
13 2 Sleeve, Cantilever Arm 05700-000-85-69
14 2 Plug, Cantilever Arm 05340-011-35-00
15 1 Magnet, Reed Switch 05930-111-51-68
16 2 Locknut, 8-32 S/S Hex with Nylon Insert 05310-272-02-00
17 1 Right Door Weldment Assembly, Conserver XL (Starting with S/N 04D10286) 05700-002-30-88
1 Right Door Weldment with Studs, Conserver XL (Starting with S/N 04D10286) 05700-002-29-85
17a* 1 Right Door Assembly, Conserver XL2 05700-003-02-97
1 Right Door Only, Conserver XL2 05700-003-02-71
18 6 Door, Guides 05700-111-33-59
19 2 Screw, 1/4"-20 x 1/2" Long S/S 05305-274-02-00
20 2 Spacer, PB Bolt 05700-000-29-40
21 4 Locknut, 1/4”-20 S/S Hex with Nylon Insert 05310-374-01-00
22 2 Door Connector Bracket, Conserver XL Only 05700-021-33-39
22* 4 Door Stop, Conserver XL2 Only 05700-011-46-30
23 1 Front Door Assembly, Conserver XL (Starting with S/N 04D10286) 05700-002-30-89
1 Front Door Only, Conserver XL (Starting with S/N 04D10286) 05700-002-29-83
23a* 1 Front Door Weldment Assembly, Conserver XL2
05700-003-02-96
1 Front Door Weldment with Studs, Conserver XL2 05700-003-03-41
24 1 Left Side Door Assembly, Conserver XL (Starting with S/N 04D10286) 05700-002-30-87
1 Left Side Door Only, Conserver XL (Starting with S/N 04D10286) 05700-002-29-86
24a* 1 Left Side Door Weldment Assembly, Conserver XL2 05700-003-02-99
1 Left Side Door WeldmentOnly, Conserver XL2 05700-003-02-98
25 2 Bracket, Cantilever Arm Support 09515-003-15-64
26* 6 Wear Button, 1/2" Dia. UHMW 05700-011-88-01
* Represents an item not shown.

Jackson Conserver AXL Specifications

General

Brand	Jackson
Model	Conserver AXL
Category	Laboratory Equipment
Language	English