53
MAINTENANCE
-Daily, after finishing the spraying, put clean water on the tank, remove the nozzles and run the
sprayer till empty.
-Remove, clean and replace the nozzles and the filters.
-Clean the main filter.
-Wash the outside and inside of the sprayer.
These procedures will avoid problems with the sprayer in future application such as : obstruction
of the filters, nozzles, extensions and ducts, as well as protect your llife.
GUIDELINES
ATTENTION: NEVER WASH SPRAYERS OR PROTECTIVE CLOTHING
(MASK,GLOVES, WORKING CLOTHES, ETC.) IN OR CLOSE TO RIVERS, LAKES,
STREAMS, BROOKS, DAMS, ETC.
-Take off and wash all the individual protective equipment.
-Wash the working clothes separately from other clothes.
-Take a shower with plenty of water and soap and put clean clothes.
COMPONENTS MAINTENANCE
MAIN FILTER
-The frequency of filter cleaning depends on the
quality of water and type of chemicals used.
-Clean the filter when filling the tank or whenever
necessary.
FVS 100
valve
ring
filtering
element
filter cap
IN-LINE FILTER (SPRAYER FALCON VORTEX)
-There is one in-line filter for each boom section.
-This filter has 80 mesh and optimizes the filtration to the nozzles.
- The frequency of filter cleaning depends on the quality of water and type of chemicals used.
-Clean the filter when filling the tank or whenever necessary.
To Next Page
Loading...
Need help?
General
