To Next PageTo Next Page
Need help?Do you have a question about the Jacto FALCON VORTEX and is the answer not in the manual?
General| Brand | Jacto |
|---|---|
| Model | FALCON VORTEX |
| Category | Farm Equipment |
| Language | English |
Sprayer identification plate details for record-keeping and service.
Safety guidelines for operating agricultural sprayers.
Safety precautions and classification for handling chemical products.
Meaning and importance of safety decals on the equipment.
General safety precautions to prevent accidents and injuries.
Cautionary advice for working near electrical supply cables.
Technical specifications for Falcon Vortex sprayer with 13.77 in nozzle spacing.
Technical specifications for Falcon Vortex sprayer with 19.68 in nozzle spacing.
Technical specifications for Falcon Vortex HORTI sprayer with 13.77 in nozzle spacing.
Technical specifications for Falcon Vortex HORTI sprayer with 19.68 in nozzle spacing.
Specifications and recommendations for Falcon 1400 AM-14 and 1400 Vortex.
Overview of control versions for Falcon Vortex sprayer.
Function and maintenance of the suction filter.
Function and types of pressure regulators: Masterflow and V.A.R.
Basic and electric controls for sprayer boom operation.
Electric hydraulic boom control and sprayer control panel functions.
Electro-electronic Masterflow control for automatic calibration.
Function of the movement sensor for the JSC-5000 system.
Bijet nozzle holder with nondrip valve and ceramic nozzles.
Nozzle function, types, and material properties.
Clean water tank for personal washing and its capacity.
PTO shaft and its safety guards.
Boom breakaway system for protection against impacts.
In-line filter and its technical specifications.
Optional low pressure gauge kit for checking nozzle pressure.
Assembly procedures for the optional foam marker.
Mounting the foam nozzle support.
Mounting the control panel.
Wiring and hose diagram for foam marker system.
Securing the chemicals mixer guard rail.
Chemicals mixer component and its capacity.
Step-by-step guide for mixing chemicals using the mixer.
Function and use of the chemical container rinse nozzle.
Flow bypass valve function directing mixture flow.
Operation of the hydraulic agitator and its inlet types.
Optional filler unit for filling the sprayer tank.
Adjusting fan rotation for optimal spraying and power consumption.
Spray boom design for applications in windy days.
Procedures to follow during the spraying operation.
Steps for receiving and inspecting the sprayer upon delivery.
Initial setup and checks before first-time sprayer use.
Cleaning filters and nozzles when filling the tank.
Daily or every 10-hour maintenance checks and procedures.
Maintenance tasks within the first 30 hours of operation.
Maintenance tasks every 100 hours.
Major maintenance tasks every 500 hours or annually.
Guide for hitching the sprayer to the tractor's three-point suspension.
Instructions for adjusting the left lift arm tie arm.
Adjusting the transversal levelling of the sprayer.
Steps to adjust the length of the third point arm.
Third point frame and its assembly positions.
How hole positions vary for different duty kinds.
Adjusting stabilizing chains to limit lateral movement.
Instructions for assembling, unfolding, and folding the boom.
Explanation of levers for controlling hydraulic booms.
Guidelines for safe handling of sprayers and chemicals.
Procedures to follow after completing a spraying operation.
Information regarding the product's warranty statement.
