V03
JCAII 1
1. Introduction
Thank you for deciding to purchase a JCAII counting scale. This goods has the excellent
performance and splendid properties under severe quality management .It is recommended to read
this manual in full before using it for good function application.
2. Precautions
◎ P lace the scale on a flat and stable surface. See 3-3 Leveling the Scale for details.
◎ Verify that the input voltage and the plug type matches the local AC power supply.
◎ W arm up the scale for 15 minutes before using it the first time.
◎ K eep the scale aw ay from EM I noise, strong w ind and vibration, w hich m ight cause incorrect
reading.
◎ Avoid sudden temperature changes (suitable operating temperature is between -5℃~ 40℃.)
◎ D isconnect the pow er supply w hen cleaning the scale.
◎ Do not immerse the scale in water or other liquids.
◎ S ervice should be perform ed by authorized personnel only.
3. Before Using the Product
3-1 Unpacking and Checking
Open the package and check the instrument for transport damage. Immediately inform your dealer if
you have complaints or if parts are missing. The package should contain:
● Scale body ● User manual
● Stainless steel pan ● Wire (power cord)
3-2 Installing Components
Cover the stainless steel pan on the top housing properly before using the scale.
Important:
Please find the delivery protection screw in the bottom of the scale. Loose it according to
the instruction sticker next to it
Before use the scale Loose the screw counter-clockwise to the end
Before move the scale Tighten the screw
clockwise
3-3 Leveling the Scale
to the end
To compensate for small irregularities or inclinations at the location, the scale can be leveled. The
scale is equipped with a level indicator at the front panel .Adjust the adjusting feet until the air bubble
in the indicator is centered as shown.
Note: The scale should be leveled each time its location is changed.
To Next Page
Loading...
Need help?
General
