OK ：Choose the needed ID item and press OK to enter the normal counting
mode.
Last / Next ：Lookup the UW record page by page.
Exit ： Exit this screen and return to counting mode.
2. Choose the needed ID item and press OK to enter the normal counting mode:
Clear Count:
------------------------------------------------------------
If there is U.W. data or COUNT data, press Clear Count to delete the UW data
and COUNT data.
Quantity Check:
------------------------------------------------------------
1. Press SETUP→ Set Weight→ General Param→ QYT CK :
2. Enter the upper and lower limit and choose the alarming mode（for example,
Beep in ）, and active the Quantity check function ON.
To Next Page
Loading...
Need help?
General
