6. GASKET MATERIALS MAINTENANCE RECOMMENDATIONS
Page 52
1998-2006 Edition
In order to maintain the high combustion efficiency, reduce annual fuel cost, extend the operational life and
ensure safe operation of the pellet stove, Jamestown highly recommends that all gasket materials be
inspected at least annually and adjusted or replaced as necessary. The table below shows the frequency of
inspection and replacement of the various gasket materials.
A replacement gasket kit (part # 03HAA) is available at any Jamestown Dealer. Instructions for replacing all
the gaskets are included with the gasket kit.
Gasket Type Pellet Stove
Model
Inspection
Frequency
Replacement
Frequency
Comments
Door Gasket All Monthly As needed or
every 2 tons
(1818kg)
Inspect door gasket seal every time door is opened
and closed for proper seal. If seal is poor and door
gasket cannot be adjusted to create the required
seal, replace.
Ashpan Gasket All Monthly As needed or
every 2 tons
(1818kg)
Inspect ashpan gasket seal every time door is
opened and closed for proper seal. If ashpan gasket
cannot be adjusted to create the required seal,
replace.
Glass Gasket All Every Ton Annual Replace annually.
Exhaust Blower
Gasket
All Annual During Exhaust
Blower
Replacement
Replace this gasket every time the exhaust blower is
removed for cleaning or replacing blower motor.
To Next Page
Loading...