Prophi
®
12R / 12 RS
3
CONTENTS
Section 1 General / type series and accessories 3
Section 2 Installation of the controller / connection diagram 5
2.1 Current measurement 6
2.2 Programming of phase-correction
2.3 Error messages: Alarm- / Message relay 7
Section 3 Operating modes 7
Section 4 Automatic operation / display functions 8
Section 5 Programming
5.1 Automatic initialization 9
5.2 Manual programming 10
5.3 Programming lock 13
Section 6 Manual operation 1&2 / Programming of fixed stages 14
Section 7 Service menu, Test run 15
Section 8 Expert mode 16
8.1 Expert mode 1
8.2 Expert mode 2 18
Section 9 Control principle 19
Section 10 Display editor 20
Section 11 Initial operation 20
Section 12 Maintenance and warranty 20
Section 13 Interface 21
Annex: Annex 1 Troubleshouting 23
Annex 2 Technical data 24
Annex 3 Table of control series 25
Description of control-series editor
Annex 4 Default settings 26
Application Mixed dynamic compensation 28
Cascading of controllers
Application Real current measurement 29
Alarm and status notifications 30
Handling-diagram / short reference 31
Application Coupling of compensation systems 27
To Next Page
Loading...
Need help?
General
