Page 5= Peak value = Minimum value = Supply
Hints for Maintenance
Before delivery the device is tested in various safety checks and marked with a seal. If the device is opened,
these checks must be repeated.
Repairs and calibration
Repairs and calibration can only be carried out by the manufacturing.
Front foil
The cleaning of the front foil must be done with a soft cloth using a common cleansing agent. Acid or acidic
agents may not be used for cleaning.
Waste management
The UMG96 can be disposed as electronical waste according to the legal regulations and recycled.
Attention!
The guarantee is void if the seals are broken.
m
To Next Page
Loading...
