31
UMG 96RM-P/-CBM
Fig. Block diagram for data exchange between PLC and UMG 96RM-P.
PLC
PLC process output box
1. Byte = Profile number (0 .. 15)
2. Byte = Data to the UMG 96RM-P
•
•
PLC process input box
1. Byte = Return signal from the profile number
2. Byte = Requested by UMG 96RM-P
Data
•
•
UMG 96RM-P
Fetch measured values
for this profile number.
Profile number
Profile number
Measurement values
Example: Using Profibus to retrieve measurement values
At least one Profibus profile must be set up with GridVis
and transferred to the UMG 96RM-P.
To Next Page
Loading...
Need help?
General
