MACHINE BASE
TO REMOVE
1. Remove the four hinge screws (A), base cushions (B & C), washers (D, E & H). Washer
(E) is thicker than the other three washers.
2. Remove the 2 set screws (F).
3. Remove the machine base (G).
TO ATTACH
4. Attach the machine base (G), and tighten the 2 setscrews (F).
5. Attach the washers (D & E), base cushions (B & C) and washers, and tighten the four
hinge screws (A).
7
www.promelectroavtomat.ru
To Next Page
Loading...
