Janome 1600P - Power Transformer

19
7. Power Transformer
[1] Remove the top cover and motor cover.
[2] Remove the board-A case lid and pull out the trans-
former connectors (primary and secondary) from the
circuit board-A.
[3] Remove the driving motor.
[4] Remove the setscrew (1) and cord binder (2).
[5] Remove the setscrews (3) and transformer (4).
[6] To attach: follow the above procedure in reverse.
8. Machine Socket
[1] Remove the top cover, belt cover and motor cover.
[2] Remove the board-A case lid and pull out the ma-
chine socket connectors (primary and secondary)
from the circuit board-A.
[3] Remove the setscrews (1) and cord guide (2).
[4] Remove the setscrews (3) and machine socket (4).
[5] To attach: follow the above procedure in reverse.
(1)
(2)
(3)
(1)
(4)
(2)
(1)
(2)
(3)
(4)