Janome 1600P - Internal Wiring

15
3. Internal Wiring
Motor cord
Motor sensor cord
Machine socket cord (primary)
Machine socket cord (secondary)
Push-pull solenoid cord*
Capacitor cord*
Cord binder
Cord guide (1)
Thread cutter cord*
Cord guide (2)
Motor cord
Motor sensor cord
Cord guide (1)
Setscrews for cord guide (1)
To prevent the internal wirings from contacting the moving parts or being caught in the joint
of the external parts, the internal wirings should properly be routed and secured as illus-
trated.
Cord binder
NOTE:
The item marked with * is applicable to 1600P and
1600-DBX only.