20
● Threading the Needle on the Right
Place the spool of thread on the spool pin second
from the left.
* The points to thread for needle on the right are
marked in blue.
* A convenient threading chart is placed on the
machine body inside the looper cover.
[1]Draw the thread through the thread guide second
from the left from back to front.
1
Thread guide
[2]Pass the thread through the holes in the second
row from the left of the thread guide plate as
illustrated.
2
Thread guide plate
[1]
[2]
1
3
4
5
6
1
2
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown.
7
8
2
(A) (B)
To Next Page
Loading...
