Janome 6234XL - Names of Parts

5
PREPARATION
Names of Parts
G) Left needle thread tension dial
® Right needle thread tension dial
® Upper looper thread tension dial
@) Lower looper thread tension dial
@Side cover
@ Looper cover
(f) Handwheel
® Power switch
® Machine socket
@ Differential feed dial
@ Stitch length dial
@ Spool stand
@ Spool holder
@spool pin
@ Thread guide bar
@ Thread guide
@ Pressure adjusting screw
@ Presser foot
@ Needle plate setting knob
@ Thread cutter
@ Presser foot lifter
@ Needle plate
@ Upper knife release knob
@ Cutting width adjusting dial
@ Upper looper
@ Lower looper
@ Upper knife
@ Lower knife
3